Spare parts and consumables

For a proper functioning of the pressure vessels, we offer a complete range of spare parts and consumables: safety screws, seals and filter cartridges. Contact us ...

Joints

 

FILTRES EQUIPEMENTS supplies spare parts for the different types of seals during maintenance operations:

 

  • Nitrile O-rings of cylinder heads
  • Safety screw seals (BS12 ring and O-ring Ø18.6x 3.53)
  • Metal ring gaskets
  • Spiral seals
  • Flat seals

 

 

 

Filter cartidges

Filter cartridges type F

The filter element consists of a synthetic felt pleated on a wire mesh reinforcement. The ends are glued in two cups which faces are equipped with felt seal sealing on the surfaces of the filters.

 

The central tube is reinforced built for high crushing resistance. An anti-wetting treatment allows the passage of water or hydrocarbons loaded gas.

 

Standard efficiency:

98.0% at 5μm

99.5% at 8μm

99.9% at 10μm

 

Type

Ø A mm

Ht mm

Surface m²

 F.50 95 162 0,125
F.50-2 95 320 0,250
F.80 120 200 0,230
F.80-2 120 420 0,460
F.100 164 265 0,470
F.100-2 164 535 0,940
 F.125 191 280 0,725
F.125-2 191 555 1,450
F.150 220 315 0,950
F.150-2 220 630 1,900
F.175 300 250 0,950
F.175-2 300 500 1,900
F.200 300 405 1,450
F.200-2 300 815 2,900
F.250 385 462 2,300
F.250-2 385 930 4,600
F.300 475 615 4,200
F.300-2 475 1250 8,400
F.400 600 615 6,900
F.400-2 600 1250 13,80


 

Filter cartridges type PN

The cartridge is made of a pleated paper element with two ends in metal cups (or over-moulded polyurethane) equipped with felt seals which seal the filter.

 

A central perforated sheet reinforcement tube avoids crushing when the load loss increases. The outer part is protected by a metal grid.

 

Standard efficiency

95.0 % to 1 μm

99.5 % to 3 μm

99.9 % to 5 μm.

 

The large filtration area increases the dust holding capacity. The paper is treated to resist water and hydrocarbon vapors.

Type

Ø A mm

Ht mm

Surface m²

PNS35 80 115 0,180
PNS50 95 160 0,407
PN.50 117 160 0,678
PNS.70 117 200 0,770
PN.80 147 202 0,970
PN.100 167 255 1,610
PN.125 192 255 1,940
PN.150 217 303 2,730
PN.175 275 200 2,340
PN.200 267 400 4,840
PN.250 317 455 7,500
PN.300 367 610 11,700

Coalescing filter cartridges type CFV

The cartridge is made of a tubular element of agglomerated glass fibers reinforced internally by a perforated metal cylinder.

The ends are over-molded in polyurethane to ensure a perfect seal the filter.

 

Uses:

Filtration of gases and liquids

Gas / liquid separation

Liquid / liquid separation.

 

Efficiency:

Solid> 99.5% on ACF dust

Liquid separation

55.0% to 2 μm

70.0% to 3 μm

95.0% to 4 μm

99.9% to 8 μm.

 

High efficiency filtration:

Coalescence effect on liquid vesicles.

Inverted filtration direction on request: IN models.

Type

Ext -> Int

Type

Int -> Ext

Ø A mm

Ht mm

Surface m²

CFV 95 300 CFV 95 300 IN 95 300 0,090
CFV 95 600 CFV 95 600 IN 95 600 0,180
CFV 95 900 CFV 95 900 IN 95 900 0,270
CFV 95 1200  CFV 95 1200 IN 95 1200 0,360
CFV 95 1500 CFV 95 1500 IN 95 1500 0,450
CFV 95  1800 CFV 95 1800 IN 95 1800 0,540
CFV 125 300 CFV 125 300 IN 120 300 0,120
CFV 125 600 CFV 125 600 IN 120 600 0,240
CFV 125 900 CFV 125 900 IN 120 900 0,360
CFV 125 1200 CFV 125 1200 IN 120 1200 0,480
CFV 125 1500 CFV 125 1500 IN 120 1500 0,600
CFV 125 1800 CFV 125 1800 IN  120 1800 0,720

Filter cartridges type CC

The filter element consists of a composite mineral fiber filter media pleated on a synthetic fiber reinforcement. The ends are glued in two cups which faces are equipped with elastomer seals sealing the filter.

 

The central tube is reinforced for high resistance to crushing creating a very important filtering surface. Moreover,  the process is suitable for liquid or gas coalescence.

 

Use:

Liquid filtration

Liquid and dry gas filtration

 

Standard efficiency is 99.99% at 1μm

Other possibilities on request, contact us.

Type

Ø A mm

Ø B mm

Ht mm

Surface m²

CC1 95 50 161 0,250
CC2 125 80 204 0,520
CC3 154 105 265 0,900
CC4 200 114 265 2,000
CC5 241 154 284 2,800
CC6 302 200 250 3,100
CC7 302 200 416 5,100
CC8 375 260 465 7,400
CC9 445 330 620 12,600
CC10 550 415 830 18,000
CC11 655 520 1000 27,000